Large Standard Durable Galvanized Retaining Wall Usage Welded Gabion Bakset

Product Description

 

Product Description

The welded gabion mesh is made of spiral binding wire. The front and rear panels, bottom plates and partitions are assembled and compressed, and then packed together with the mesh cover. All the gabion products that have been folded and tied are independent individuals. That is, the gabion mesh is welded into a box to fill with stones, which plays a certain role. The welded gabion mesh uses low-carbon steel wire, and is welded and formed by precise and accurate mechanical equipment. After the surface is passivated and plasticized by electrogalvanizing, hot-dip galvanizing, plastic coating, plastic dipping or Galfan, etc. The welded gabion mesh is particularly widely used, mainly suitable for park landscape building exterior walls, commercial building outsourcing, urban landscape, and park landscape.

Product Parameters

 

Material	Galvanized Steel Wire, Galfan Steel Wire/Zinc-5%Aluminum Wire
Wire Diameter	3 mm-6 mm
Aperture	50*50 mm, 50*100 mm etc
Gabion Box Size	100*30*30 cm, 100*50*30 cm, 100*100*50 cm, 100*100*100 cm etc.
Finish	Hot Dipped Galvanized; Heavy Zinc Coating;Galfan Coating;PVC Coated.
Normal Box Size(cm)	Diaphragms	Capacity (m3)	Mesh Size(mm)
100x30x30	None	0.09	50×50 or 100×50
100x50x30	None	0.15
100x100x50	None	0.5
100x100x100	None	1
150x100x50	1	0.75
150x100x100	1	1.5
200x100x50	1	1
200x100x100	1	2

Aperture: The aperture is the distance from the centre of one wire to the centre of the next both horizontally and vertically. We are currently producing as standard products both 4mm and 5mm mesh in 75mm x 75mm aperture and 4mm in 100mm x 50mm aperture.
 

75mm x 75mm aperture

The most common size. When calculating cage sizes take into account that all lengths, widths and heights will be in increments of 75mm. Overall it is easier working with a square aperture than a 75mm x 75mm rectangular one, however a rectangular aperture can have a stunning look.

100mm x 50mm aperture

When calculating cage sizes take into account that lengths, widths will be usually be in increments of 100mm and heights 50mm. This is based upon it being more common for 100mm in the horizontal plane.

 

Assembling accessories

Spiral connection:

Spirals are one method to connect panels to build a gabion cage.

Spirals are the strongest connection method Spiral cage joiners are also supplied (larger diameter than standard spirals)

 

C rings connection: 
This connection method requires a gabion C ringer tool (available for purchase)

Tensile strength 1700.1900 N/m2

Mild steel coated Galfan 5% Al, 95% Zn
3mm diameter x 45mm(widest point)

Stiffener (braces):

Stiffeners are placed in-side the cage to give cage rigidity

In addition to stiffenerswe offer lacing wire

U-clip:

Starting with the first aperture, place a clip and tighten using the pliers.Make the panels as square as possible before tightening.

Continue all around, connecting every 150mm for 75x75mm, every 100mm for 100x50mm & 50x50mm.

Product Application

                                        Flood discharge and lead flow                                  Rockfall prevention and soil erosion protection

                                        Protecting the bridge                                                 Landscape gabion wall
 

                                        Seashore recovery project                                        Welded gabion box retaining wall
 

                                        Seaport project                                                          Defending the road
 

 

Company Profile